BioNatro® A1 Nano Catalyst 納米醛淨觸媒噴霧 (2L) (歡迎零售/批發)
瞬間分解 高效淨化 甲醛(HCHO)及揮發性有機化合物(VOC)
簡易、安全、無毒性
BioNatro® Nano Cataly is a highly effective and safe material for HCHO removal. BioNatro® non-toxic and eco-friendly.
Product features:
產品特點:
- Effectively resolve Formaldehyde (HCHO) & TVOC
- 高效分解甲醛及TVOC
- Non-Toxic, Alcohol-free, Non-Flammable
- 安全、無毒、無酒精
Active Ingredient:
有效成份:
Polypeptide, Formaldehyde dehydrogenation, Mixtures
多肽,甲醛脫氫劑,混合劑
Storage保存:
Store in the shade between 5˚C and 50˚C
存放於5˚C至50˚C,避免陽光直接照射
Direction For Use使用方法:
Clean and dry the surface prior to application. Away from the surface 30-45CM, Spray the entire surface evenly , ensure it is completely covered. Allow to dry for approx. 30 minutes. If the smell of formaldehyde is strong, spraying again after 2-3 days to consolidate the purifying effect.
噴塗前,應將各種油漆面板材及家具表面的灰塵清除乾淨。摇匀BioNatro®噴霧,距離噴塗表面約30-45CM以均匀橫線(每行一字)噴塗,移動速度稍快,距離過遠或者過近都令效果不理想。(注意,不要噴過多免有滴㾗)。噴塗後約30分鐘,自然風乾後即可發揮效用,乾燥時間因天氣環境而異,盡量保持家居通風狀態,72小時後達到最佳效果。如甲醛氣味濃烈,相隔2-3天於同一位置作重覆噴塗,能達到鞏固效果。
Caution:
May cause mild skin or eye irritation in rare cases. If skin irritation occurs, get medical advice. If product gets in the eyes, rinse thoroughly with clean water for several minutes. Remove contact lenses if used. If eye irritation persists, get medical advice.
在極少數情況或會引起皮膚或眼睛不適。如皮膚出現敏感症狀,應即尋求醫學意見。如產品不慎進入眼睛,應用大量清水沖洗並立即求醫。
收到訂單付款後,我們會經順豐﹝SF﹞寄出,一般可於2-4個工作天內便可以收到產品。